Search Casting Studies
There are 11 studies matching your search criteria.
Bayonet XT-A
The 3-piece bayonet XT-A is assembled into a circular piece and provided with a cover plate. The part is designed so that it connects with an inlay heatsink, necessary due to the heat generated by the installed LED (60-80°C). The casting challenge is to achieve a...
Central Console
Utilizing zinc alloys to create this part allowed for outstanding control of each step and parameter involved in the full process, from design to final part to achieve, to achieve the perfect design. With die casting, the same surface quality and appearance could be...
Electronic Connector
The key benefits to this product’s design was a close cooperation between die caster and customer through a clipping system. It utilizes modern assembling technology, and because it does not involve a screw, creep is not a risk.
Electronics Housing
SINAMICS Control Unit CU305 This casting is a housing for the most demanding industrial electronics. To avoid short circuits, it needs to be free of residual particles. To save costs for post-processing and cleaning steps, a net-shape mold concept was developed....
Getriebegehäus e für die Höhenverstellun g eines Schreibtischs
Das Gussteil ist ein Getriebegehäuse einer Höhenverstellung für Office-Lösungen (Bürotisch). Das Gehäuse dient zur Aufnahme der Getriebekomponenten und ist gleichzeitig Schnittstelle zu Motor und Einbauumgebung. Die Zinkdruckgussvariante löst eine Kunststoffversion...
High Tension Cage
This part is a device component warranting the operators security during intervention on high-tension lines. The reasons behind choosing zinc alloy include the product’s complex tool design, the combination of thin wall casting and rigidity, and the dimensional...
Housing for HSD Connector
This HSD connector (HSD = high speed data) is a part of the control units in upper segment cars. The 4-pin connector assures large volume of data transfer as compared to the standard connector with only 1 pin. The required tolerances for this miniature part are...
PC-Gehäuse zur Montage auf der Hutschiene
Die PC-Gehäuse Bauteile mussten vielfältige Anforderungen erfüllen: Neben Robustheit beim Handling in industrieller Umgebung und einer hochwertigen Optik zählten eine optimale Wärmeabfuhr und abschirmende Eigenschaften zu den Kriterien, die letztlich für Zink als...
Remote Control
This high-end remote control’s design has tactile control without any knobs. The zamak surface was cast to a thickness of 0.6mm with less than 0.05mm tolerance on thickness. Piezo elements translate the bending of the surface into electric signals. For casting this...
Subframe and Carriage
The three parts of this design form a subassembly that measures the thickness of ophthalmic lenses before edging. The frame ensures the palpate lever guidance in the ophthalmic glass machine tool. Then, the glass is machined with the contour note during the palpate...